|
Thanks for the pics guys. Had not noticed the hot running caps, but good to know. If you have one a cap tester that can test for leakage at rated voltage and power factor or ESR may be a way to look into those caps. I always check the new caps that go into sets, I do not really trust a lot of the stuff that comes out of China, I sometimes wonder about the quality control, but since they seem to be the sole source for most everything you have to buy and check. Its one of the reasons I do not rush right out and replace all the cans anymore. I have found that often the existing cans work fine. Prob 1/2 or more of my mid 60's sets have the orig Mallory cans and work fine. I DO recommend fusing the B+ right before the 1st doubler or filter, regardless of new or old caps. Its seems logical since that (Ecaps) is the only place where there is a chemical product in the set.
I am going to have to study this for a while (the CRT mount) I def want it attached to the chassis so I can flip it on its side and be able to work on it.
|