|
There is I think another horizontal adjustment hidden underneath the chrome rail on the right side. I'm at work, so just pulling this out of my ass without having the set here to look at. I thought I remembered a hidden contrast...and then about an inch further back another horizontal. They are on the two front modules at the same height and match up to two hidden holes. Obviously you STILL need to deal with that pot in the back, but you MAY be able to get a picture to sync with the other control. I think it's like a "horizontal range" or something. The rail is held on by a screw in the BACK of the set...so no need to dissasemble the set to just get to that. You undo the back screw and the rail has a little clip WAY up front next to the CRT...and a little pressure fitting keeping it from just FALLING off. Then you'll see two access holes. Shine a light and you'll see two pots. I'm sure you already found the top hole. I think there was a hidden control THERE for linearity as well...or maybe a linearity bias. One is accesible, and the other hidden I think. You have to remove the cover to get there. Those two pots are right next to eachother on the SAME module. No idea why they HID these...especially that contrast one.
Again...I'm at work, and don't have the 301 sitting in front of me. Feel FREE to correct me if I'm wrong.
__________________
My current "holy grail" is trying to get enough parts together to get a Singer TV6U going. Been kicking my ass for nearly a year now :-P
Last edited by AiboPet; 07-02-2012 at 02:35 PM.
|