|
Well I had two caps to put in and check the high voltage rectifier. After finishing up all I get is a bright horizontal line. It worked before but the performance was going down hill.
On top of that it turns one section of the vertical osc./ output tube red. The cap I need is a .022 3750 volt cap and I am using 2 -.01 @10,000 volt caps that are newer but not old. I switched caps and tried different vert tube and results same. one part of the input to the vert transformer gets fed from flyback and the other comes from the vert tube and is showing about 100 volts. Any ideas and also the Sams number so I can get a diagram. it is model 562.10111. thanks!
the input to vert transformer is about 100 volts both wires and the output shows 0 volts .
Last edited by radio nut; 06-04-2012 at 09:46 AM.
Reason: added more
|