Thread: tube tv ?
View Single Post
  #32  
Old 05-21-2012, 03:51 PM
radio nut's Avatar
radio nut radio nut is offline
Born in the wrong decade
 
Join Date: Dec 2007
Location: Lima, Ohio
Posts: 839
I replaced all the yellow caps, and then did the clear plastic ones with white paper on the inside with values on them.
So far the wiggle in the screen is gone but anything on the image that is bright white has a twinkle or flash to it. I have one cap that I haven't found and that is a 3750 volt .022 mf. Any ideas on that would be great.
Moyer's does not and just radios has 6000 volt but they are way longer than I need.
Also I did't think about til now But I have no idea if this set has a high voltage rectifier tube. next to the flyback box there is a horiz. output and a damper tube but no rect..
the flyback box has a cap on it that is 3/4 inch away from the horiz. freq. coil so I couldn't put a tube in there and the sticker that shows the tube placement does not show one.
Would someone please pull up the diagram and see what the tube should be and a procedure to get to it.
Sears all channel black and white tv model 562.10111. Thanks!
Reply With Quote