|
I'm not familiar with all of the RCA 630TS clone chassis but I'm working on a Fada 940 which has a
similar chassis. One way you could check to see if it's a Fada clone is to look for Fada part numbers as a lot of the parts in my set has Fada numbers stamped on them.
The flyback is 42.103
The large round bleeder resistor in the box under the antenna terminal (R 185 in riders schematic) is marked 117.20 on the Fada.
The original can electrolytics on the Fada were made by Mallory and have Fada numbers on them;
22.22
22.23
22.24
22.25
22.26
22.27
|