View Single Post
  #12  
Old 03-28-2012, 01:26 PM
mpatoray's Avatar
mpatoray mpatoray is offline
VideoKarma Member
 
Join Date: Apr 2010
Location: Near Youngstown Ohio
Posts: 258
Hi all,

After replacing caps and making progress, resistors started going bad... Some i broke the leads off of when replacing other caps, the wire seems very fragile. Other caps started drifting badly the more the set was used. So Started replacing the larger higher power resistors first.

Now I am having issues with the horizontal locking in, it gets close but will just not make a nice straight picture without waving. I noticed that there are horizontal frequency and horizontal stability controls and wondered if I might start there.

Also I would love to take a scope to this thing and make sure my waveforms are correct, but there is a big problem and that is the CRT and yoke are mounted permanently in the cabinet, so if I take the chassis out I have nothing to connect it to...

Using a LaserDisc player as my source, have attached a picture of the effect. It is Jose Caracas singing.

Once the electronics are done I am not sure what to do about the photo finish which is badly marked in places.... but working order electronics are the order of the day first.

Matt
Reply With Quote