View Single Post
  #51  
Old 03-27-2012, 07:59 AM
polyphase polyphase is offline
VideoKarma Member
 
Join Date: Nov 2010
Location: New York
Posts: 42
re: Cap based ballast

Earlier in this thread I suggested that the value of the 30h 5w resistor in the ballast be 'tweaked' downward to set ideal string currents.

In fact this resistor is not in the filament circuit at all, it is part of the DC supply. I was writing from memory, and in my arrogance (or senility) I didn't check my notes or the schematic to verify this resistors function.

The correct value for this resistor is 10 to 20h, 5W. The 30h would overheat as originally stated.

My apologies for this lapse.

Last edited by polyphase; 03-28-2012 at 10:55 PM. Reason: corrections
Reply With Quote