Quote:
Originally Posted by radiotvnut
Do you have HV at the CRT? Also, is the CRT filament lit? There is a small resistor in the CRT filament line that will open, causing a loss of voltage to the CRT filament.
|
You may be correct. I have plenty of HV, no filament voltage to the CRT. I found that resistor: 3 ohms, 3W wirewound, at the rear edge of the main board, so I may be able to sneak in my iron and replace it without pulling the board.
The challenge will be finding a local place that sells such a resistor. I hate making an online order for one 20-cent part!
Phil Nelson