View Single Post
  #9  
Old 03-25-2012, 12:08 AM
fox_rivers's Avatar
fox_rivers fox_rivers is offline
VideoKarma Member
 
Join Date: Jan 2008
Location: Las Vegas, NV
Posts: 50
Well I finally got all the electrolytics replaced and the 2 diodes in the power supply. I put a 40watt bulb in line to limit the current to the set. Flipped the switch and nothing, no power. I took the bulb out of line and still the same.

I went through all the caps and everything and it all checked out so the only thing I suspected was the ballast and sure enough the ballast schematic i used was incorrect for my tv. Pin 5 which was one side of the ac line wasn't used so I have to figure out which parts in the ballast go to what pins. I'm not exactly sure how I'm gonna figure that out.
__________________
Mastered soldering with paws.

Last edited by fox_rivers; 03-25-2012 at 12:15 AM.
Reply With Quote