View Single Post
  #17  
Old 03-23-2012, 12:15 AM
ChrisW6ATV's Avatar
ChrisW6ATV ChrisW6ATV is offline
Another CT-100 lives!
 
Join Date: Feb 2007
Location: Hayward, Cal. USA
Posts: 3,552
This set is a rather massive project, I am finding out as I go along. Most of the wax capacitors were replaced, many as long ago as the 1960s based on likely date codes on the replacement caps, but those early replacements are "maroon beauties" (maroon-colored molded caps with the leads out the middle of each end, as opposed to "drop"-type radial dipped capacitors). Also, I am finding out that some of the replaced caps are lower-voltage ones than the values in the parts list, so I am going through every replaced part in this chassis to compare with what most likely should be there. This may be similar to what Phil did as he described earlier and on his Web site. In the process, I have decided I will restuff electrolytic cans if at all possible on every set I restore (including this one), because tracing back from randomly-installed replacements under the chassis is a pain in the neck that I do not want to burden future owners with.

Good news: I have the cabinet back, HV cage cover and controls I needed thanks to Dave A and another VK member. Following the rest of the capacitor research, I will next complete the analysis of the high-voltage section work needed, and then look into making an adapter to connect this chassis to my Sylvania CK3000 test jig.

What do you all think about those "maroon beauties"-are they likely good since they're from the 1960s or newer, or should I replace them now?
__________________
Chris

Quote from another forum: "(Antique TV collecting) always seemed to me to be a fringe hobby that only weirdos did."
Reply With Quote