View Single Post
  #8  
Old 03-19-2012, 07:59 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Thought comes to mind: if you have a second 120V power transformer of similar power rating, and a high current heater secondary of the same voltage as the transformer inside the TV set. connect the two primaries in series, and with 220V power applied to this series circuit, connect one side of both the heater windings of both transformners together, and measure the voltage between the other ends of both windings. If you see something less than say 2V for 6.3V windings, you should be able to connect them together, to make both transformers evenly distribute half the 220VAC between them. If you get 12VAC, swap the first heater connection on one of the windings, then check that you get less than around 2V. The heater load should evenly split between the two transformers, and some of the power for the B+ would flow between the two heater secondaries, and also between the two primaries.

Haven't tried it, so YMMV...
__________________
Reply With Quote