View Single Post
  #58  
Old 03-18-2012, 09:03 PM
charokeeroad's Avatar
charokeeroad charokeeroad is offline
John Q
 
Join Date: Sep 2010
Location: Southern California, IE
Posts: 644
Quote:
Originally Posted by old_coot88 View Post
If you haven't already done so, be sure and check that 270K resistor going to the wiper of the height control. It's the plate load resistor of the V.osc. It tends to go 'waay high in value because of being constantly hammered by a high level pulse during operation. It's a very common failure across all brands and vintages of sets. Well worth bookmarking.
It looks like R65 on my schematic. ,red,violet,yellow. It tested 320-330k, +/- 10% at max should be 297K. I'll replace it. Thanks.

Last edited by charokeeroad; 03-18-2012 at 10:32 PM.
Reply With Quote