View Single Post
  #31  
Old 03-10-2012, 01:22 PM
fox_rivers's Avatar
fox_rivers fox_rivers is offline
VideoKarma Member
 
Join Date: Jan 2008
Location: Las Vegas, NV
Posts: 50
I ordered a pair of Panasonic ECQ-E2106KF 10uf 250v film capacitors, a 200 ohm 5w and a 30 ohm 5w resistor from Mouser. I removed the innards of the old ballast and desoldered the copper leads from the pins using a solder sucker. I placed the resistors on a piece of PCB I cut out of an old power supply and I used this schematic to wire the caps and resistors to the base of the ballast. I spray painted the metal can for the ballast black and installed the newly rebuilt unit into metal can thus looking awesome.
__________________
Mastered soldering with paws.
Reply With Quote