Forget all those Heathkits, this is ultimate homebrew TV set:
www.richardbrice.net/ww_tv.htm
The author describes two TV sets built from scratch by his father using plans from Wireless World. The latter one he built was a color model:
Quote:
|
The design was a hybrid solid-state/valve variant. All the small-signal stages contained transistors: the output stages and the timebases, valves. This wasn't a kit: all the electronics was either constructed on tag-board on copper-strip, matrix board (Veroboard). The only PCB was the IF strip and this was made by hand from copper-clad board with a drill and a sharp pen-knife! Certainly, the most remarkable part of the whole project was the colour decoder section, constructed on two, long strips of matrix board.
|
Some photos:
Chassis
Homemade IF Strip
PAL Color Decoder
The sad part is that he tossed it after his father died.