View Single Post
  #4  
Old 02-29-2012, 02:52 AM
Kevin Kuehn's Avatar
Kevin Kuehn Kevin Kuehn is offline
Workin' Late Again
 
Join Date: Jan 2011
Location: WI
Posts: 3,976
It looks like the two 47mf caps are used in a voltage doubler circuit to produce the 500V supply that feeds the G2 controls. That G2 setting would be very sensitive to any leakage current in the wiring going out to the CRT socket. I assume that G1 sets up correctly for 45V? The G2 setting is dependent on G1 being set correct.
Reply With Quote