View Single Post
  #3  
Old 02-24-2012, 12:35 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
It may have a bad flyback. The only way you'll know for sure is if you have a flyback tester. Otherwise, you'll have to take a chance with the transistor. Before I installed the transistor, I'd re-solder all connections in the horizontal sweep circuit. Pay special attention to the horizontal driver transformer. That's the small transformer that connects to the base lead of the HOT. . Also, check/replace any electrolytic caps in the B+ or horizontal driver circuits.

Those sets were built by Sanyo and I don't recall seeing too many bad flyback transformers in them.
Reply With Quote