View Single Post
  #14  
Old 02-17-2012, 02:35 PM
Unimatic1140's Avatar
Unimatic1140 Unimatic1140 is offline
VideoKarma Member
 
Join Date: Jun 2002
Location: Minneapolis
Posts: 70
Thanks everyone, Tom I like your test of "shorting cathode and grid together at the CRT socket". I just want to be sure I understand how to do this without creating sparks and explosions lol.

Here is an image of the schematic, is the cathode Pin 11 and if so which pin is the grid pin 2 or 10 or both 2 and 10?

If I understand you correctly I should put the cap on the picture tube, but not all the way down. Then take a jumper cable and short pin 11 to pin 2 or 10?

Thanks again for you help.
Reply With Quote