View Single Post
  #8  
Old 02-11-2012, 04:02 PM
Jamesk Jamesk is offline
VideoKarma Member
 
Join Date: Dec 2011
Posts: 5
Quote:
Originally Posted by ChrisW6ATV View Post
Those warped areas make me think the yoke could be bad, unless the pincushion circuits could cause this type of problem.
A bad yoke doesn't sound good. I'm not sure where I could find a replacement.

A buzzing increases around the yoke are when the vertical height is increased. As vertical height increases distortion increases.

Here is a picture with the two vertical outputs switched. The darkness is from the camera. It looks like the top right bend moves to the bottom left. The bend on the bottom moves to the top although it seems to change in shape a bit, it's still compressed.

Reply With Quote