View Single Post
  #6  
Old 02-09-2012, 07:45 PM
julianburke julianburke is offline
VideoKarma Member
 
Join Date: May 2004
Location: Knoxville, Tennessee
Posts: 649
It is not your picture tube, as CRT's don't typically fail like that and it is not your ion trap (if so equipped) unless someone moved it. Try cleaning all of the frontal controls such as the brightness, contrast etc. You may also check for dirty tube sockets in the video circuit. I have an early Philco that did the same thing that was a dirty tube socket and an early Sparton that had a dirty brightness control..
__________________
julian

Last edited by julianburke; 02-10-2012 at 06:52 PM.
Reply With Quote