|
Ok Here is where we are at today
I tried another 6SL7 and the picture did not change
Granted its used from my bin of toys but it gave me the same exact symptom
the bottom of the pix is compressed I can stretch the top right off the screen
I can move the pix up and down it moves freely so it is not a wapred plate in the crt
but when i ge to certain point the wavefome (Sawtooth) gets distorted on the tops its like it hits a wall
I also get a bout 250 V on pin 5 Plate and 185 on Pin 2 Plate
there is over 700V feeding the 2 6.8 M resistors from the focus supply
It seems like the tube may just be weak
but I also notice the compression going in on on pin 4 and 1 of the 6SL7 when you try to expand the pix
I also notice the other side of the 05uf Cap that comes from the Vert OSC Does NOT compress when you push the vert so it is def in the output stage Anybody Dealt with this?
Or Am I on my own?
Im ready to wrap this thing up If i can just get the compression out of the bottom of the pix
|