It is working again!


I had subbed all the tubes except the damper (which tested good the first time around) well I subbed all the horizontal stage tubes from the bad set in to the good set and the good set would not light. So next I went and put the horizontal tubes from the good set in the Silvertone and it got TONS of HV (I for got to connect the top of the HV reg.


) very fast. I then started plugging the original tubes in one by one until it went bad again. I retested the bad damper and it is in the "?" zone on my tester unless I let it sit for a while.
I really need to keep a spare damper with that set with a sign that reads "In case of HV issues: don't do anything until you try this."
I still need to readjust the horizontal stage, and the deflection in general. As well as fix the no color issue (I'm hoping I did not blow anything when I accidently shorted one of the color pots to ground). Here is a picture of it in action.