View Single Post
  #22  
Old 01-21-2012, 11:46 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
Quote:
Originally Posted by radiotvnut View Post
It's now in my hands. It's a 4-tube 9" set with late '69 date codes on the tubes; so, it's probably a 1970 model. The four tubes consist of a video output tube, vertical osc.output tube, horizontal osc tube, and the horizontal output/damper tube. The set is fairly clean and looks to be a low hours set. The only real problem is the rod antenna is broken and will need to be replaced.
Unless there are still VHF translators or LPTV stations in your area, you probably don't need that monopole antenna anyway (unless you want to replace it simply for the sake of the looks of the set) since all full-power TV stations are digital. The set should work on cable or with a converter box, the former at least until analog cable is done away with -- whenever that may be.

BTW, I looked at the picture of your RCA 9" TV and saw that it does, in fact, have the block RCA logo at the far left-hand end of the trim strip above the CRT, so yes, your set was almost certainly made after 1968, the year in which RCA switched from its decades-old round "RCA" logo to the block one that even Thomson (or whomever makes the guts of RCA-branded flat-screen televisions these days) uses on its sets today.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.

Last edited by Jeffhs; 01-21-2012 at 11:54 PM.
Reply With Quote