|
The missing tube has a four-pin socket so is not a 37 or 76. Rickey: what you are going to have to do is trace the wiring around those two four-pin sockets and report it here before we settle on ballast tube(s). My GUESS is this:
1. Power line in goes to first 4-pin. May or may not go to switch first.
2. Wire comes from first 4-pin and goes to second 4-pin.
3. Wire comes from second 4-pin and goes to first heater of the remaining tubes.
4. All the remaining tubes have their heaters connected in series.
__________________
Reece
Perfection is hard to reach with a screwdriver.
|