View Single Post
  #41  
Old 01-12-2012, 10:31 PM
cbenham's Avatar
cbenham cbenham is offline
VideoKarma Member
 
Join Date: May 2006
Posts: 471
Quote:
Originally Posted by bandersen View Post
Great job Harryhausen never looked so good

I wonder if an EICO 944 flyback tester would work ? They have a specific mode for iron core vs. powdered core.
The 944 is the first thing I tested it with. A Heathkit tester didn't test it well either. I removed the flyback from another same model 50T-14XX Philco set that was working and it tested the same as the original in question.
THEN I found the intermittent HV 500 pf cap. It was rated at 10KV so I replaced it with one rated at 15KV. No more troubles and both flybacks worked when put back in their respective sets. It's been three years but as I recall, both flybacks produced a very low reading on the 944.
Cliff
Reply With Quote