Quote:
Originally Posted by miniman82
I have read that most ringers are so sensitive that the filament winding will cause a false 'bad' reading if the tube is left in, pulling the tubes seems logical.
|
I had not kept up with this thread until today when I read about the miswire and that the set now works properly.
I have experience in attempting to test these Philco flybacks. It can't be done with any "flyback" tester.
Looking at your photo of the flyback out of the set I see it is constructed with a laminated core rather than a powered iron core which makes all the difference in the world.
The Q is much lower for all flybacks built with laminated cores. I found this out when I had to replace the flyback in the Philco set pictured in my avatar.
Long story short, the Philco flyback was OK, but the HV 500 pf cap would short intermittently when the picture went to a dark scene because the HV would rise and arc inside the cap. Replaced the cap and all is well.
Glad you got your Philco working. It looks great.
Cliff