Thread: Ctc-7aa
View Single Post
  #7  
Old 01-08-2012, 01:43 PM
Ampico-kid's Avatar
Ampico-kid Ampico-kid is offline
VideoKarma Member
 
Join Date: Mar 2007
Location: Harpers Ferry, WV
Posts: 340
I don't claim to be an expert with convergence, but the first thing that jumped out at me when I saw your picture is that it appears the static convergence is off...most notably the Blue lateral adjustment. This is the control on the neck of the crt closest to the socket that moves the blue beam left and right.

I would guess that you haven't tried to perform a full static convergence yet. Using a Dot/Bar generator and set to dots, the goal is to end up with a pure white dot in the center of the screen, using the three static convergence magnets on the neck of the crt. The Blue lateral is also used to obtain that white dot. Once you've got the center white dot the rest of the screen is converged using the Dynamic convergence controls on your convergence board.

I've never seen a perfectly converged vintage color TV. I think the goal is to get it as good as you can and be happy with it. It most definitely does take some artistic and creative maneuvering to get the picture to look good since many of the controls interact with each other.

I would say if you can sit at a distance of about 6 ft. to 8 ft. from the screen and it looks good...you've succeeded.

Hope that helps......
Bob
Reply With Quote