|
Thanks, guys. I found out the "dirty contrast control" is probably something more-I tested it and its action seems good but the IF/video gain fluctuates rapidly most of the time, sometimes showing a high-contrast picture even with the control all the way down, and even shorting its center terminal to the near-ground end does not affect the problem.
The plate voltages on the four video IF tubes are higher than what is on the schematic, and the last one especially changes along with the flickering picture. (I suspect that is a symptom of the problem though, not the cause, but I will need to do more tests.) Just putting the voltmeter probe on them calms the problem down a bit (and reduces the gain as well). This might be a good excuse to test and fire up the B&K 1077B I got a while back from a generous member.
Any suggestions are welcome as well, thanks.
__________________
Chris
Quote from another forum: "(Antique TV collecting) always seemed to me to be a fringe hobby that only weirdos did."
|