View Single Post
  #2  
Old 12-03-2011, 04:45 PM
jr_tech's Avatar
jr_tech jr_tech is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 4,573
Quote:
Originally Posted by andy View Post
Beam landing is actually very tricky on these because it's easy for the beam to miss the correct color stripe if the timing is off. It also requires razor sharp focus which limits brightness, and causes the color to degrade as the CRT ages. I've never seen on of these with very good purity. Even at 3.7", they require dynamic focus, and two horizontal deflection circuits to maintain precise horizontal linearity.
Good points ... THANKS!
I guess that I had assumed that the sweep rate was somehow re-adjusted on a micro basis as a result of the information provided by the index stripes, but that must have been impractical at that time with analog circuits.

jr
Reply With Quote