View Single Post
  #56  
Old 11-16-2011, 01:56 PM
bandersen's Avatar
bandersen bandersen is offline
RCA 741PCS
 
Join Date: Mar 2009
Location: Chicago, IL
Posts: 8,829
Quote:
Originally Posted by kvflyer View Post
Bob,

It sure looks good. I am with you, have to cringe when you start working on Bakelite wondering if it will ultimately shine up. There was a "shiny" surface on the stuff when it was new. You hate to break the shine. But you hate scratches as well. I have a 26R12 with a very nice cabinet. But it has a large scratch on the top. I have been reluctant to work on the scratch. You have inspired me, Thanks!
If it's just one or two scratches, I wouldn't advise sanding. I've only sanded sun blasted, scuffed, and very scratched cabinets.

My before photos on this cabinet really don't show the full extend of the scratches. There were dozens.

I was very hesitant to ever try it too, but I read numerous other restoration threads where others swore it works great.

Here are some example of others cabinets I've sanded. The first one I ever tried was this damaged and faded Motorola 9T1. I figured I didn't have anything to lose.







Quote:
Originally Posted by Kevin Kuehn View Post
Have not tried this, but I'm wondering if a few deep scratches could be filled in with several coats of clear or toned lacquer using a small brush. Then level with 600 and finer papers. At least the lacquer can be wiped off with lacquer thinner if it looks bad. I suppose an alkyd varnish would also work and require less build up.
I've been wondering about that too. I've seen plenty of examples where cracks and voids were filled in with epoxy or super glue and sanded, but then primed and painted. Never read about attempts to retain the original bakelite look.

I guess I'll give it a go on this cabinet
__________________
Here are my Vintage Radio & TV YouTube Channel and Photo Gallery

Last edited by bandersen; 11-16-2011 at 01:59 PM.
Reply With Quote