Quote:
Originally Posted by TerrySmith
If your talking about modern LCD, DLP or plasma the answer is NO! There is nothing to converge. These have pixels rather than lines. No sweep circuits either.
|
It's just as well, since converging a standard NTSC CRT set isn't what I would call an easy task (in the 1970s I had a Silvertone roundie, RCA CTC12 clone, on which the convergence was way off; never did get it right in the three years I had the set). The absence of sweep systems in today's FPs also means two fewer circuits to cause problems.
What's next -- a TV with no circuitry at all, just the panel?

I think today's flat sets are very close to that point already. I cannot imagine how an entire TV can be fitted into a cabinet as slim as most of today's FPs are (I don't think today's flat sets are more than an inch or so thick). Of course, the absence of the traditional CRT shaves quite a bit off the front-to-back measurement and the weight of the set, and LED backlighting of almost all modern FPs means no space is required for a large incandescent backlight bulb or CCFL (cold-cathode fluorescent lamp); no need for a power source for such a bulb, either. No worries over replacing the backlight bulb as well. At $200+ apiece, these bulbs are not cheap (to say nothing of sky-high repair costs, since incandescent backlights were not intended to be replaced by the set owner), so it is no wonder these older HDTVs are being replaced by modern FPs when the old sets develop expensive repair problems. No different from CRT sets made from roughly 1980 to the end of the NTSC era.