View Single Post
  #4  
Old 11-11-2011, 10:53 PM
earlyfilm's Avatar
earlyfilm earlyfilm is offline
Eternal Member
 
Join Date: Jun 2011
Location: Culpeper, VA
Posts: 527
Quote:
Originally Posted by Jessica1988 View Post
I replaced the projection bulb myself and it works great but we have now noticed very tiny spots on screen. If the screen has a dark scene you really see them, it looks like the stars in the sky on the screen.
Interesting.

My Samsung DLP TV is now going on its eight year and I'm still on the original lamp. I'm estimating 5 hours a day , 7 days a week and the bulb has dimmed maybe 50%, but never gone out.

However, I did have to replace the color wheel two years ago, when its bearings failed. While I had the set apart, I was very unimpressed by what a lousy job Samsung had done sealing the color wheel and DLP chip, and keeping the heat away from the DLP chip. I considered cleaning everything, but decided the risk to do more harm than good was very real, so I left put everything back together without cleaning anything but the seals.

When you replaced the lamp, did you blow out the dirt? (I would advise wiping it out and not blowing it out.)

Did the lamp seat exactly as the old one did?

How much cooling air the lamp gets depends on how well it mates with the gaskets.

If the lamp is not seated correctly, correcting that may stop the damage from getting any worse, but it won't cure it.

I tend to agree that considering the price drop in large screen TVs, you would probably be better served by replacing the set than repairing it.

And, yes this post should have been in the solid state TV forum although it is a projection TV.

James.
Reply With Quote