View Single Post
  #7  
Old 10-27-2011, 01:05 PM
zenith2134's Avatar
zenith2134 zenith2134 is offline
VideoKarma Member
 
Join Date: Feb 2005
Location: UTC -4
Posts: 2,546
Hey I was referencing the KV1712 only because it too was an Econoquick. After searching through my post history at v.k. I've owned this 1203, a 1212, the 1712, a 1510, and a 1310. Most had very weak crt's but to be fair I found them after their lives were done. Yours might be a lower-hours set, but a chassis picture would help in determining that. The insides of the worn-out ones I've found were literally blackened(coated in black dust since the HV circuits attract it while the set is operating) so they were used up.

If the tube is good they make awesome pictures.
Until you complete the crt setup procedure outlined above it will never look right.

Oh, also-ran a search on econoquick and in an old thread two highly respected vk members, and myself were all at a loss as to whether or not the econoquick kept the filament lit at halfed power or was just a quick-heater type
Reply With Quote