|
fujifrontier --->"How does it differ from the composite connection output by, let's say, a DVD player? "
The IF out is greatly different from Composite video. The tuner takes the carier radio frequency that has been amplitude modualted by the video signal, and frequency modulated by the sound at the transmiter, and filters out all but the carier frequency of the channel of your choice then mixes the signal with an oscilator whose frequency when subtracted from the frequency of the transmitter is is the IF frequency (there is also some amplification that happens in most tuners). To sum it up the tuner takes a station and lowers it's carier frequency to the fixed frequency of the IFs.
The signal then goes down the RCA cord to the IF amps which greatly amplify the fixed IF frequency that the tuner puts out(here the IF is still modualted in the same way as the transmitter signal at this point).
Then after passing through all the video IF amps the signal(containing both modulated audio and modualted video) is sent to the video detector. The video detector DEmodulates the video part of the IF and outputs composite video (but in most sets this signal also contains modulated sound that is split off and sent to the sound IF at this point) the remaining audio carier is filtered out here and the cleaned composite video is sent off to be split into Synch, color video, and monochrome video which after being processed by their respective circuits form the image you see on the screen.
You would see nothing resembling a picture if you connected that RCA IF cable to your DVD players composite out. So don't try it.
If any of this is confusing I can clarify (I could also deccribe the video circuits after the detector if your curious). The tuner IF and detector of a TV are a specalized type of "superhetrodyne reciever" circuit (google what is in the "" to learn more) with the tuner doing the job of all stages between the antenna and the IF(IF is short for intermediate frequency by the way).
Hope you found this enlightening.
Last edited by Electronic M; 10-26-2011 at 07:40 PM.
Reason: left out a clarifying word.
|