View Single Post
  #8  
Old 10-03-2011, 08:49 AM
Zenith26kc20's Avatar
Zenith26kc20 Zenith26kc20 is offline
VideoKarma Member
 
Join Date: Apr 2009
Location: New Orleans
Posts: 860
Almost done... again

This past weekend I finally got the NC back up and running. A new yoke (thanks to damen and his friend) and C49, a three section electrolytic that opened up after the set was on about two hours. I tacked some tubulars underneath until I can remove and stuff the can. It looks like the color crystal is failing as color sync jumps out and I have to readjust the color osscillator coil to bring it back in. From the schematic, it looks like a small one will work as the crystal has very little voltage on it.
After that I'll finish the convergence and get some pictures.
Reply With Quote