Quote:
Originally Posted by bandersen
While waiting, I did some troubleshooting on my variac and found the problem 
Can anyone guess what it was ?
|
I have had no experience with Chinese made imitation Variacs, but based on experience with the Japanese imitation species that flooded US in the late 1940's and early 1950's, causes for shorted
imitation Variacs in order of probability:
1) Line bypass or wiper bypass capacitor failed
2) Insulating washer on the spring loaded wiper failed
3) Incorrect wiper adjustment allowed the wiper to over extend and an arc melted a bit of solder, which shorted adjacent turns on the winding
4) Carbon wiper brush fell out and the metal holder shorted near turns on the winding
Or, finally, if the fuse blowing is not instantaneous, but takes a couple of seconds, the fuse holder spring.
James