View Single Post
  #2  
Old 09-30-2011, 08:21 PM
bandersen's Avatar
bandersen bandersen is offline
RCA 741PCS
 
Join Date: Mar 2009
Location: Chicago, IL
Posts: 8,829
Quote:
Originally Posted by Electronic M View Post
I've got one of that model cap checker (someone mounted a new transformer outside the case on mine) that I've been meaning to test/restore. I wonder how it compares to the heathkit C-3?
There are some key precision parts in the CB-1-60 like a big tapped resistor divider and 2% capacitors. I'll post details in the Test Equipment forum in a bit.

I'm not familiar with the C-3, but I do have a Simpson 383-A Capacometer I'll be restoring.


Quote:
Originally Posted by Kevin Kuehn View Post
Is there an EIA code anywhere on the CRT or other tubes, indicating who manufactured them for Admiral? Is that rust on the transformer laminations?
Here are the markings on some 6AU6s. The CRT base is marked National Video Corp. Chicago, 10BP4 while the bell is stamped "Admiral" and "S". Perhaps it's been rebuilt

Yes, it sure is rust. I've worked on three 20X1 chassis to date and they've all had rusty power transformers. I use a little Loctite Rust Neutralizer on them than some satin black enamel paint.





The reforming seems to be going OK, but I had to use light bulbs of increasing wattage because my cheapo variac died a few months ago. It blows fuses instantly when it's turned on even with no load
__________________
Here are my Vintage Radio & TV YouTube Channel and Photo Gallery
Reply With Quote