View Single Post
  #10  
Old 09-05-2011, 02:04 PM
Ed in Tx's Avatar
Ed in Tx Ed in Tx is offline
Zenith Walton My 1st TV
 
Join Date: Nov 2008
Location: DFW
Posts: 1,421
Quote:
Originally Posted by Zenith26kc20 View Post
On the funai, if the IR diodes can be tricked into thinking there is no tape present, it may give an all clear. They go into a conductive state from the IR transmitter diode on the board and prism arrangement when there is no tape. I would try shorting the two receiver diodes and that may trick it...
Yep. Short the tape end and take-up phototransistors. That'll work. And you also would need to affix the rotary encoder mode switch in the Eject position, to remove the mechanism and leave the board in the set to make room for the DTV tuner.

Last edited by Ed in Tx; 09-05-2011 at 02:08 PM.
Reply With Quote
Audiokarma