Quote:
Originally Posted by radiotvnut
I may have to try that with the next one of these I find with a dead VCR. What did you do to fake the TV chassis into staying on with the VCR removed?
|
This particular set had a control line that would tell the TV to power up or not, which the VCR used to drive. I used a switched 5V power source tapped from the converter box to run this control line. So when the converter boz is turned on, the control line goes from 0V to 5V. It feeds a 4 legged voltage regulator located on the TV circuitboard that has the usual input, output, ground and the 4th pin is an on-off control, similar to a TTL gate input.
For the audio amplifer, I used a computer speaker amplifier, powered off the TV power supply. Found a 12V supply line there. The converter box provides variable level audio, so the converter box's remote does volume.