View Single Post
  #26  
Old 09-02-2011, 11:42 AM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
Quote:
Originally Posted by ChrisW6ATV View Post
Dave-

Thank you for that clear description of how this type of remote control system works. On my set, there is a spot on the back panel where the remote control on/off switch is labeled, but the switch itself is not there (nor is there a mounting hole). This set does have two other switches on the back: A "fast warm up" on/off switch (that was off when I got the set, probably helped the CRT live longer), and a "sepia tone" on/off switch (that would change the color temperature, I am guessing?).
You are correct regarding the sepia tone switch. This switch was labeled "sepia switch" on some makes of TVs and serves to inject a soft blue color into a black and white picture. Some Silvertone color sets of the '60s had a front panel control labeled "Chromix" that did the same thing; however, the adjustment was so critical and sometimes confusing that most people just set it at midrange (neutral) and forgot about it. The sepia switch was often (probably more often than not) left in the off position because many people didn't know its true function, although the switch and its function probably was mentioned in the instruction manual. Many viewers didn't care about adjustments like this, as long as the picture looked halfway decent. There are people who will watch horribly misadjusted color TVs (I have known a few), not caring what the picture looks like as long as it is there. Today's color sets are built such that little or no adjustments to color or contrast, brightness, etc. are necessary; viewers need only turn on the set, select the channel they want to watch, and forget the rest. This was why automatic fine tuning (AFT) controls were designed into color TVs beginning in, I believe, the '70s -- because many viewers could not fine tune a color picture properly (most viewers did not realize that if the fine tuning is not set exactly on a color set, there will be no color), and automatic color adjustments quickly followed.

Magnavox's "TAC" (Total Automatic Color), Zenith's "Color Sentry", et al. were other automatic systems designed into TVs of these makes for the same reasons, although many times the picture looks terrible with these automatic controls activated; many times it is possible to get a much better picture by adjusting the manual color and tint controls until the flesh tones are correct, although again many viewers did not want to be bothered with those controls. The reason the picture is often better with the automatic controls disabled is that these systems, which were often little more than push button switches that activated preset controls, were probably adjusted at the factory using color bars from a generator rather than actual air signals.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.

Last edited by Jeffhs; 09-02-2011 at 11:48 AM.
Reply With Quote