Wow, you guys are good!
Those caps are located underneath the display with no easy way to access them.
I had a 47@25v cap handy so I touched it across the lugs from the back side, the first one I tried C102 did the trick, the display came on nice and bright!
The cap is located in the top left as viewed from the front, I was able to unsnap the display and bend it down just enough to reach in with a small pair of needle nose pliers and remove the cap, (after de-soldering it first of course) put in the new one and awaaaay we go!
Here's a pic of it working, the guilty cap is sitting on top of the display.
Thanks a million for the help!