Thread
:
Zenith 19" half dark, Half bright
View Single Post
#
5
08-09-2011, 10:26 PM
radiotvnut
VideoKarma Member
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Unless someone has mismatched some screws, you'll need a 1/4" nutdriver to remove the back cover. You shouldn't need a schematic for this job. The cap that's bad sill be at the rear of the board, next to the flyback transformer.
radiotvnut
View Public Profile
Find all posts by radiotvnut
Audiokarma