Thread: Help with ctc9
View Single Post
  #10  
Old 07-15-2011, 11:47 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
I would be looking at the video amp tube as well. contrast should not need to be nearly all the way up. you need to check the voltages at the pins of the CRT and see if anything odd going on there, again CRT bias can mess up HV. With the contrast control near max it should be very dark in the dark areas. Have you recapped the cathode bypass of the video amp tube? I have had several set that have a weak cap there resulting in loss of gain (contrast).

if you get a good HV setup and that bar is still there, your best bet is to break out that scope, as good a time as any to start using it. I use mine all the time on TV work.
Reply With Quote
Audiokarma