Quote:
Originally Posted by ChrisW6ATV
That is a nice mount for the CRT. Did you use the CTC-5's original yoke, and if so, how did you anchor it since it normally is held by the plastic shroud? I once worked on an early color set that had had its 'AXP replaced by a 21FBP22, and the (original) yoke was basically loose on the neck. I made a bracket that was suspended from under the top of the cabinet to hold it in place and allowed its position to be adjusted.
|
The yoke is loose on the neck - I will take it off in case of any big moves, to avoid possibility of breaking the tube. But convergence/centering/purity wise it's working fine. I can't remember now if the internal plastic sleeve has some expanders stuffed in it (probably at the top) to keep it from tilting backwards, and I can't see past the convergence coils to see what's there at the moment. I do know it slides pretty easily.