View Single Post
  #37  
Old 07-07-2011, 03:39 PM
Mal Fuller Mal Fuller is offline
VideoKarma Member
 
Join Date: Jun 2011
Posts: 110
I'm not sure and a basing diagram was useless in confirming or denying how the filaments of the three guns are internally connected in a 21AXP22 and later roundies. My memory says that they are in parallel, not series. If that's true therefore, it's very improbable that the filaments in all three guns are open.
Hence, if all three filaments are dark, that would seem to indicate that the two solder connection on the base pins need to be re-soldered.
The tube might not be beyond hope.

Last edited by Mal Fuller; 07-07-2011 at 03:43 PM. Reason: add a word
Reply With Quote