View Single Post
  #3  
Old 06-30-2011, 05:09 PM
fsjonsey's Avatar
fsjonsey fsjonsey is offline
Living The Draper Ethos
 
Join Date: Jul 2006
Location: Northeast Ohio
Posts: 539
Quote:
Originally Posted by DaveWM View Post
use a HV probe to monitor the CRT anode voltage

is the HOT red plating? wiggle the HOT and the horz osc tubes. hold a neon bulb near the plate cap of the HOT (I have one mounted to a small plastic stick).

I would pull the HOT plate cap off, check for B+, if that checks then I would put it back on and check the HOT grid for about -50v, screen voltage of around 150v. Also check the cathode current of the HOT.

This is where a tv analyst like a B&K 1076 comes in real handy.
The HOT is not red-plating, and has a mild blue glow. I don't have an HV probe right now, but will borrow one from a friend. Neon lamp lights near the plate cap of the HOT.
Reply With Quote