View Single Post
  #3  
Old 06-16-2011, 04:52 PM
VintagePC's Avatar
VintagePC VintagePC is offline
Tube bug got me 05/2010
 
Join Date: May 2010
Posts: 535
Quote:
Originally Posted by JCFitz View Post
You make cabinet work look so easy. I wish it came that easy to me.
Wanna make a trip out to Maryland and reveneer a jukebox?

I got a Wurlitzer 1400 that the veneer is really bad on and a Seeburg C that the preferred method of restoration is to cover the entire cabinet in white oak veneer as the original finish was printed and very few survive at all because of the rough treatment jukeboxes get.

The task just seem daunting to me compared to the rest of the restoration which comes easily to me since I've worked on electronics every day for over 21 years. Working with wood not so much except making a few projects back in shop at school out of real woodl.Never veneer.
Veneering isn't quite as daunting as it seems.
Did my 4068 with oak veneer last summer. My first veneer project, but I had an experienced hand to help.
Managed it myself for the most part, but the second person was helpful for the large sheets.

A good tip is to use yellow carpenter's glue. Spread it with an old credit card or so on both sides, then apply, cover with brown or wax paper, a sheet of something flat (plywood, acrylic, etc.) and lots of weight to keep it down. (I used 3 or 4 40 kg cat litter boxes) Don't be sparing with the glue, you want to wet everything, but it shouldn't be so thick that all you see is the colour of the glue.

When the glue has set, you can use an iron (just heat, no steam) or heat gun to re-activate it and work/press out any bubbles/ridges. Trim, sand, and finish!

If you're stuck for veneer amount and positioning is tight, you can coat the veneer and surface with a smooth coat of glue and let it dry to clear. You can re-coat a few times to get a decent layer. When dry, position as perfectly as you want, and you can then iron it on easily.

Remember to put brown paper between the iron and veneer to keep things from getting stuck to the iron or smudging... some glue _will_ invariably work up through splits or small holes.

Last edited by VintagePC; 06-16-2011 at 04:55 PM.
Reply With Quote