View Single Post
  #36  
Old 06-16-2011, 11:33 AM
IsthmusTV's Avatar
IsthmusTV IsthmusTV is offline
VideoKarma Member
 
Join Date: Nov 2010
Location: Madison, WI
Posts: 329
After being busy with other things, I'm now preparing to replace all the electrolytics in the PS. The cans are rated at 475 Volts. Would it be OK to use caps rated at 450 Volts? It seems that you really pay a premium for electrolytic caps rated at higher voltages. For my Emerson 637 which also had EC's rated at 475 V, I used 500 V caps from Antique Electronic Supply. I later read on ARF that 450 Volt caps would have been fine. Any thoughts?

Thanks,

Clark
Reply With Quote