Did a bit more work on the set and couldn't get the noise out of the sound system. Also the picture was not entirely stable as I had to keep adjusting things to keep the picture good. Read a bit here and from the antique radio forum site and tried replacing the 6BN6 which cleared a bit but not much improvement. Decided to replace the tubes in the if section

as the picture stability and the static from the speaker sort of coincided. After replacing the 2nd if stage 6AU6, everything stabilized and the hum disappeared with just a bit of adjustment on the buzz control. Put that tube back into the checker and it tested ok but after a minute or so, the short light on the checker dimly lit. Guess I'm gonna have to allow the checker to heat long before saying it's a good one. Right now just letting it run and so far so good after an hour