View Single Post
  #9  
Old 05-31-2011, 11:24 PM
JCFitz JCFitz is offline
VideoKarma Member
 
Join Date: Sep 2005
Location: Willards,MD
Posts: 411
Quote:
Originally Posted by Microtrol View Post
you're a lot braver than I on firing it up but looks like you have a very good deal there. Going to check that 4.7 oh resistor in the cup for sure on my unit. All the sand resistors were badly out of spec on my blonde so far. Hope to fire mine up in a couple weeks part willing.
Well the main filter in the tv power supply seems to have finally formed as it runs cool to the touch but there is a slight background hum in the speaker so it may still need replacement(restuffing) all the others I'll see. All the ones in my Zenith color roundie except one that was bad checked out good for value and esr so the remaining cans in this set may be still good also.

I checked all the tubes.It seems nearly the entire set was retubed with GE tubes in 1963 according to the date code on the tubes. Somebody liked GE tubes.They all checked good. The 2 vertical 6SN7s were Westinghouse. 1 of them was the bad one I replaced. The original Zenith 6AL5 was in there and had a short and I broke the GE 6C4 in the tuner trying to get the shield off. It was a 63 GE tube also but it may have been weak. I get snow and finally a picture when I get between 100 and 110v ac with a new one. Before it took full line voltage to get it from white screen to a picture.

The vertical is still shrunk regardless of the switch position(It does increase when I switch to full screen but not all the way) ,there is no sync and the picture has poor contrast so no further improvement to be gained until I recap it and go over the resistors and clean the controls. So no more powering up on the old papers I promise...lol.

I'll definitely check those sand resistors(Thanks Microtrol) and my flyback needs recoating also. Maybe it's a good idea to replace all the sand resistors.

Doing some cleaning I see a serial no. sticker on the glass bell of the tube before it meets the metal funnel. This may be an original Zenith tube after all.It's definitely a strong one.

Last edited by JCFitz; 05-31-2011 at 11:28 PM.
Reply With Quote