Thread: Capehart 661-P
View Single Post
  #27  
Old 05-30-2011, 09:08 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
If the current draw on that pin is really low in normal use, you might get away with some form of conductive paint or epoxy.

Or solder a thin lead to the flush broken off lead area, and epoxy over it to keep it from breaking off.

I'd do it while you have the CRT set up on that test setup, to be sure you really did connect.
__________________
Reply With Quote